Air Venturi Avenger / Umarex Origin Picatinny Rail ST0029
$40.00
Easily replace the factory picatinny scope rail with our version for more rigidity.
Made of 6061 aluminum and black anodized.
52mm Bottle Clamp ST0030
$59.99
If you're uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Great fit for the AEA HP Plus guns
Features:
6061 T6 aluminum
Matte black anodize
Tank Valve ST0031
$200.00
Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze!
Features:
Open and close tank with a 2.25 inch knob
Drain the line with the 1.25 inch knob
Dead head to test the tank's pressure
2.2 inch gauge display
Tank thread 7/8-14 UNF
Pair with ST0037 adapter to be able to screw on carbon fiber gun bottles.
FX Impact Top Rail Support (TRS) Standard ST0034
$250.00
This rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the top rail mounted bipod by GRS to inline night optics, and everything in between.
Features
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
It has a built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors.
Available in standard and compact sizes with black anodize.
Weight = 1 lb
Extends past the gun block 12.5 inches
For a 600mm barrel, pair it up with this adapter to allow the shroud to pass the rail.
Fx Impact Top Rail Support (TRS) Compact ST0035
$240.00
This new rail changes an already great looking tactical gun into a jaw dropping beast! More importantly, it opens up the possibilities with the latest airgun trends. From the top rail mounted bipod by GRS, to inline night optics and everything in between.
Features
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allow you to attach accessories like: flashlight, laser & weights.
It has a built in 20 MOA, gives your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud drooping. It minimizes or eliminates any point of impact changes when switching suppressors.
Available in standard and compact sizes with black anodize.
Weight = 11oz
Extends past gun block 8 inches
Tank Bag ST0036
$200.00
Saber Tactical tank bags are here. Large enough to fit a 9.0L tank.
Features:
OD green
Max 22 inch circumference & 23 inch long tank (29in. w/ valve together)
Two large pockets for accessories
Long velcro strip for patches
Molle webbings to attach your other molle compatible accessories
Clear slot for ID card
FX Shroud Extender 1/2 x 20 Female to 1/2 x 20 Male ST0038
$35.00
This adapter adds .75 inches to the FX shroud. Female 1/2 x 20 to Male 1/2 x 20
Features:
6061 T6 aluminum
length .75 inches
Includes thread protector
Black anodize
Weights: 1.5oz
28MM outer diameter
Hatsan Blitz Double Tank Adapter ST0033
$150.00
The Hatsan Blitz is a fun gun, shooting semi and full auto! You can imagine how much pellets and air you go through in one session. We can help the fun last a little longer with this double tank adapter.
Note* Please be aware that you'll need two air bottles that have built in valves to work with this adapter. FX or Daystate bottles will work.
Features:
6061 T6 Aluminum
Black Anodize
Stainless steel tank thread nipples
Delrin Bushing for TRS Clamp ST0040
$5.00
This bushing goes inside the TRS clamp allowing you to better stabilize the FX carbon fiber sleeve. This does not include the clamp.
Features:
Made of black delrin.
Fx Impact Quick Disconnect Sling Adapter ST0042
$20.00
Easily attach this to the rear of your FX Impact to use with a quick detach or straps for your sling.
Features:
Made of hardened steel
Black anodize
FX Impact Low Profile Full Arca 3 Swiss Rail ST0043
$165.00
This rail is for those that do not need picatinny slots at the end of their rail, this one has full arca. Ideal for the 580cc and 700cc bottles.
Features:
MLok slots at the bottom and on both sides of the rail for add-on accessories.
Low profile, hugs closer to the bottle
Sling QD slots on both sides
6061 T6 Aluminum
Black anodize
From start of trigger guard until the end of rail is 15.75 inches x 2.75 inches wide
FX Impact M3 First Regulator Bypass ST0039
$30.00
This adapter replaces the factory's first regulator, it recovers the plenum chamber faster for a followup shot. It is highly recommended for PRS shooting style or hunting with no worries of the FPS dropping, causing your POI to change.
Works with the old and new versions FX bottle valves.
Helps in high powered pressure settings, allows you to run a higher pressure regulator directly in the plenum for the heavy slug shooting.
This reg bypass is made of stainless steel to prevent rusting.
FX Impact Arca 3 Compact ST0047
$155.00
This rail has a full arca rail on the bottom for your compact FX Impact. It comes with an extended magnetic dust cap.
Features:
Made of 6061 T6 Aluminum
Black anodized
Nylon tipped set screw to prevent rail from flexing against the bottle
Overall length from trigger guard to the end is 11.25 inches
M Lok slots on bottom and on the side for your go to accessories
1/4-20 threaded hole for camera tripod adapters
Quick disconnect holes on both sides
AR Style Grip with Ambidextrous Thumb Rest ST0049
$65.00
This grip has a thumb rest that can be positioned on either side for competitive shooters who do not like to wrap their thumbs around the grip. You can also adjust the angle to your preference.
Note* The first shipment of grips is compatible with FX Impacts and most AR-style grips. We've found that the FX Maverick has a thicker adapter and will not be compatible. We marked the first batch with a Yellow round sticker on the package.
Update* - 01/10/2023 - The second shipment has come in and the grips are now compatible with the Fx Maverick. The AR-style grips are not currently compatible with the Saber Tactical Bag Rider. This feature will be coming at a later date.
Features:
6061 T6 aluminum
Black anodized
Skeletonize to reduce weight
Ambidextrous thumb rest
Weighs 6.0 oz
FX Impact Magnetic Arm Lock ST0048
$35.00
This magnetic arm lock help keep the cocking arm open. Useful during competition when you are required to keep the bolt open.
Features:
6061 T6 Aluminum
Black anodized
Stainless steel screw
Easy install
Weigh only 1oz
Installation instruction:
Highly recommend you remove the bottle
Fire the gun to remove any air in the plenum
Unscrew bolt in front of plenum. See picture 1
Install Magnetic Arm Lock
FX Maverick Top Rail Support (TRS) Standard ST0044
$250.00
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = 1lb
6061 T6 aluminum
Black anodized
Note* Highly recommend pairing with the Maverick Cheek Riser ST0046
FX Maverick Top Rail Support (TRS) Compact ST0045
$240.00
Features:
Integrated bubble level in the rear allowing you to quickly check to make sure your gun is level. A must have for long range shooting.
M-Lok slots allowing you to attach varied accessories such as; flashlight, laser and weights.
Built in 20 MOA, giving your scope more elevation for long range shooting.
Has a Delrin shroud clamp to prevent shroud droop. It minimizes or eliminates any point of impact changes when switching suppressors.
Weight = .8 lb
Note* Highly recommend pairing with the Maverick Cheek Riser ST0046
FX Maverick / Wildcat Cheek Riser ST0046
$50.00
Features:
Cheek riser is made of delrin with Aluminum mounting plate
Allows a little over 18mm of vertical adjustment.
Ambidextrous for left and right hand shooters
Weight = 3.6oz
Note* Highly recommend pairing with the standard/compact FX Maverick TRS rail
Fx Maverick Double Tank Adapter ST0053
$25.00
Pair this adapter with the FX Impact Double tank adapter ST0011 and you can convert your single tank Maverick to a double tank. Please note you will also need an extra air tank.
Features
6061 T6 aluuminum
black anodize
Fx Impact Ambidextrous Cheek Rest ST0054
$35.00
ABOUT ITEM
The Fx Impact Ambidextrous Cheek Rest is the perfect accessory for any shooter. Whether right or left-handed, this cheek rest will provide a comfortable and stable platform for your cheek while shooting. The cheek rest is extremely easy to install, and it's made of durable materials that will last you a long time. With the Fx Impact Ambidextrous Cheek Rest, you'll be able to shoot with improved accuracy and comfort. Order yours today and see the difference for yourself!FEATURES
Compatible with all versions of the Fx Impact
Compatible with the Saber Tactical Cheek Risers
Weighs only 3.2 oz
Made entirely of Delrin material